M-P38-FBA Fiber Alloy Putty
1. Characteristics:
Fiber Alloy Putty, this product has high mechanical strength and good filling properties, mainly used for repairing concave or deep holes on the surface of fiberglass components and automotive sheet metal parts. It has good construction performance, fast filling defects, and a smooth surface after coating and scraping, with fast drying speed. It can be quickly polished, and the powder is easy to polish. After polishing, the putty film is fine, smooth, and flat, which can meet the high efficiency requirements of rapid repair.
2. Substrates:
Steel plate, aluminum plate, bare iron, fiberglass and old paint surface.
3. Applications:
1. Thoroughly remove rust, oil stains, old paint marks, and water from the surface of the substrate; Keep the substrate clean and dry before scraping.
2. Mixing for use: Mix the putty with the specialized BPO hardener in a ratio of 100:2 to ensure a uniform and consistent color. Note: The operating time can be 2-5 minutes/25 ℃ (depending on the proportion of hardener and temperature changes)
3. Polishing: After scraping and coating at ≥ 25min/25 ℃, it can be polished.
4. Technical Data Sheet:
Testing Items | Inspection Standards | Technical Indicators |
01. Status of putty in tin | GB3186-82(4) | Green gray ash, uniform paste, without coarse hard blocks |
02. Appearance of putty film | GB1727-92 | Uniform color, smooth and crack free |
03. Scratch ability | GB1727-92 | Easy to scratch, without curling edges or shrinkage holes |
04. Consistency（cm） | GB1749-89 | 8-13cm |
05. Pot Life（min） | GB1727-92 | 2-5min Agglomeration to the point where it cannot be scraped |
06. Tack free time（min） | GB1728-79 | ≤10min |
07. Sanding time（min） | GB1728-79 | ≥25min |
08. Polishing properties（20 times） | GB1770-79 | 120 # sandpaper for polishing, easy to polish, non-stick sandpaper |
09. Flexibility（mm） | GB1748-79 | 50-100mm |
10. Adhesive force (MPa) | GB5210-2006 | ≧1.5 |
11. Heat resistance（120℃±2℃）1h | GB1735-79 | No powder shedding, no cracking, no peeling |
5. For Professional Use Only:
Before use, please read and follow all labels and MSDS precautions.
6. Usage Information:
 Using a spatula
2-5 minutes Refer to TDS | Polish with P80 – P120 sandpaper Store in a cool place Refer to relevant health & safety data sheets |
7. Risk and Safety Information:
1. Refer to relevant health and safety data sheets.
2. Harmful by inhalation. Avoid inhalation of steam and spray, and avoid inhalation of dust for polishing. When ventilation is poor, appropriate respiratory protection must be worn.
3. Avoid skin and eye contact.
8. Precautions:
1. It is strictly prohibited to add solvents such as paint thinners to reduce the viscosity of the coating, otherwise it may cause foaming, depression, cracking, and other phenomena of the coating. However, diluents can be used to clean the coating tools.
2. Cover immediately after use, and it is strictly prohibited to put used putty into the original container.
3. Putty and hardener are hazardous chemicals, and putty must be stored in a cool place, away from heat sources, sunlight, accumulation, collision, etc.
4. During use, storage, and transportation, relevant national safety regulations should be followed. Skin and eyes should be avoided from coming into contact with the product or inhaling its vapors. It is best to wear safety goggles and protective gloves.
5. The effective storage period of this putty at sealed room temperature is 12 months from the date of production.
